Patch Cords

CAT6A Patch Cord, LSZH

Q: Which patch cord categories do you manufacture?

CAT5E, CAT6, CAT6A, CAT7 and CAT8 assemblies, in unshielded and shielded constructions, with PVC or LSZH jackets. Each cord is factory terminated and tested before packing.

Q: What lengths are available?

Lengths are made to order. The specification does not fix a length list, so send the lengths you need with the quantity and we quote them together.

Q: Do the cords match the electrical specification of the bulk cable?

The shared specification is 100 ± 15 ohm impedance, maximum conductor resistance of 9.38 ohm per 100 m at 20 °C, insulation resistance of at least 5000 Mohm.km and mutual capacitance of at most 5.6 nF per 100 m, over an operating range of -20 to 75 °C.

Q: Can patch cords be supplied in our colours and with our labels?

Yes. Jacket colour, boot colour and printed labels are part of the OEM options. Send the colour list and label artwork with the enquiry.

NP6A716A015-LSZH

Category CAT6A

Shielding UTP

Jacket LSZH

Use Indoor

Factory-terminated patch cord for connecting patch panels, switches and outlets. Tested to the same impedance and resistance limits as the corresponding bulk cable, supplied in standard lengths to order.

Request a quote for NP6A716A015-LSZH Ask on WhatsApp Add to quote listIn your quote list

We run this construction on our own lines in Guangdong, so MOQ and lead time follow the run you order. The report is issued per part number from our final checks.

Shipping it? Work out how many cartons fit in a 20GP, 40GP or 40HQ.

Made on our line

We build this patch cord on our own line: the cable is cut, terminated and checked before it is packed, and the parts that show — print, colour, packing — follow your drawing. It is tested to UL758, UL1581, UL444, TIA/EIA-568, CSA C22.2, ISO/IEC 11801, YD/T1019-2001 before it is reeled, and the report comes with the part number it was run on.

See the six production steps

Specification

Property	Value
Nominal impedance	100 ± 15 ohm
Max. conductor resistance (100 m / 20 °C)	<= 9.38 ohm
Operating temperature	-20 to 75 °C
Insulation resistance	>= 5000 Mohm.km
Mutual capacitance	<= 5.6 nF / 100 m
Jacket	Low smoke zero halogen (LSZH)
Standards	UL758, UL1581, UL444, TIA/EIA-568, CSA C22.2, ISO/IEC 11801, YD/T1019-2001

One electrical specification covers the patch cord range. Length, AWG and jacket material are set when the order is built: we cut, terminate and test each cord to your length list, so the three are fixed on the order.

Produced to your part number — jacket printing, colour, packing and labelling follow your specification. See how production and testing run. The test report for NP6A716A015-LSZH is issued from our in-process and final checks — ask and we send it with the quotation.

How a patch cord is made

A patch cord is a short length of the same cable construction as the horizontal run, terminated with plugs at both ends and tested before packing. The plug, the strain relief and the termination quality decide whether the cord meets the channel specification — which is why the electrical limits printed above apply to the finished assembly, not only to the bulk cable.

Colour is a documentation tool as much as a cosmetic choice: it is how a rack records which VLAN, service or customer a link belongs to.

Where patch cords are specified

Patch panels, switches, patch-by-exception racks, server cabinets and desk outlets. The category should match the channel: a CAT6 cord in a CAT6A channel caps the channel, and the resulting test failure is usually blamed on the permanent link rather than on the cord.

What to confirm before ordering

Send the length list, the category per row, the colour scheme and the jacket material required by the room's fire strategy. Boot type, label printing and packaging are OEM options confirmed with the quotation.

Questions about this item

Which patch cord categories do you manufacture?

CAT5E, CAT6, CAT6A, CAT7 and CAT8 assemblies, in unshielded and shielded constructions, with PVC or LSZH jackets. Each cord is factory terminated and tested before packing.

What lengths are available?

Lengths are made to order. The specification does not fix a length list, so send the lengths you need with the quantity and we quote them together.

Do the cords match the electrical specification of the bulk cable?

The shared specification is 100 ± 15 ohm impedance, maximum conductor resistance of 9.38 ohm per 100 m at 20 °C, insulation resistance of at least 5000 Mohm.km and mutual capacitance of at most 5.6 nF per 100 m, over an operating range of -20 to 75 °C.

Can patch cords be supplied in our colours and with our labels?

Yes. Jacket colour, boot colour and printed labels are part of the OEM options. Send the colour list and label artwork with the enquiry.

Compare this item against the rest of the family in the Patch Cords comparison table, or read the knowledge base.

Other items in Patch Cords

Where this is specified

Office and campus LAN — horizontal cabling for commercial buildings
Data centre and rack builds — patch cords, high category copper and cable management

Send your part-number list

We quote from the list you send — no minimum for a first enquiry.

Request a quote Back to Patch Cords

CAT6A Patch Cord, LSZH

Specification

How a patch cord is made

Where patch cords are specified

What to confirm before ordering

Questions about this item

Other items in Patch Cords

CAT5E Patch Cord

CAT8 Patch Cord

CAT6 Patch Cord

CAT6 Patch Cord, Colour Variant

CAT6 Patch Cord, Short Length

CAT6 FTP Patch Cord

CAT7 Patch Cord, Short Length

CAT7 Patch Cord

CAT7 Patch Cord, LSZH

More from Patch Cords

Where this is specified

Send your part-number list