Multi-Pair & CCTV Cables

SYV-75-3 CCTV Coaxial Cable, 96-strand braid

SPCC-75-3-96

Type Coaxial (SYV)

Size 75-3

Braid 96 strands

Part number SPCC-75-3-96

CCTV coaxial cable for analogue video and CATV distribution. Single solid bare copper conductor, physical foam PE insulation and a combination of aluminium foil and tinned copper braid shielding keep a stable 75 ohm impedance over the run.

Request a quote for SPCC-75-3-96 Ask on WhatsApp Add to quote listIn your quote list

Ask for a sample with your own print on the jacket: the run is set up for your marking, and the report is issued for the exact part number.

Shipping it? Work out how many reels fit in a 20GP, 40GP or 40HQ.

Made on our line

We draw, insulate, lay up, shield and jacket this construction in one plant. For SPCC-75-3-96 that means the finished gauge copper, the specified wall Physical foam PE, aluminium foil + tinned copper braid, pVC. Next to SPNC-2P-U50GR the only differences are jacket (PVC vs PVC or HDPE) and insulation (Physical foam PE vs HDPE, 0.9-1.36 mm). GY/T135-1998, SJ/T11138-1997 are the limits it is checked against, and the results travel with the reel.

See the six production steps

Specification

Property	Value
Type	SYV-75-3
Impedance	75 ohm
Conductor	Single solid bare copper
Insulation	Physical foam PE
Shielding	Aluminium foil + tinned copper braid
Braid coverage code	96 strands
Jacket	PVC
RoHS	Compliant
Standards	GY/T135-1998, SJ/T11138-1997

One specification runs across the multi-pair range and one across the SYV coaxial range, because the line is set up per construction. Where a model carries a value of its own, it is set with the order rather than estimated here.

Reel and carton carry your part number, not ours — the print plate is made once and kept for repeat runs. See how production and testing run. The test report for SPCC-75-3-96 is issued from our in-process and final checks — ask and we send it with the quotation.

How these cables are built

Multi-pair cable bundles 2 to 50 twisted pairs under one jacket. Each pair is insulated with HDPE, the pairs are laid up in layers, and the whole assembly is jacketed in PVC or HDPE indoors, or in PE with waterproof paper outdoors. The higher the pair count, the more the lay-up and the pair-to-earth capacitance balance matter, because crosstalk between pairs is what limits a riser.

The coaxial and control cables in this family are built differently on purpose: SYV is a single 75 ohm coaxial construction for video, while RVV and RVVP are flexible multi-core cables for power and control, with foil and braid added on the RVVP version.

Where this family is specified

Multi-pair cable is the backbone of voice and low-speed data risers, intercom and door-entry systems, and small campus backbones where fibre is not justified. SYV coaxial is still the standard for analogue CCTV and CATV distribution, and RVV/RVVP carries camera power and PTZ control where a flexible multi-core cable is easier to terminate than coax.

What to confirm before ordering

Confirm the pair count per riser or the cable type per camera, the indoor or outdoor condition, and the total length. For SYV, confirm the braid count; for RVV/RVVP, confirm the core count and cross-section. Labelling of reels and boxes to match the as-built documentation is quoted with the order.

Questions about this item

How many pairs can you supply in one cable?

The multi-pair range covers 2, 8, 12, 25 and 50 pair constructions, indoors with a PVC or HDPE jacket and outdoors with a PE jacket and waterproof paper. Conductors are solid annealed bare copper from 0.40 mm to 0.58 mm.

What is the difference between the SYV coaxial and the RVV cable on this page?

SYV is a 75 ohm coaxial cable with foam PE insulation and foil plus tinned copper braid, used for video and CATV distribution. RVV and RVVP are flexible multi-core cables with bare copper conductors and PE insulation, used for camera power and control; RVVP adds foil and braid shielding.

Which braid do I choose for SYV-75-3 and SYV-75-5?

The specification lists two braid counts per size: 64 and 96 strands for SYV-75-3, and 96 and 128 strands for SYV-75-5. Higher braid count gives better shielding coverage for longer runs or noisier environments.

Are these cables suitable for outdoor installation?

The outdoor versions — part numbers containing ODPE — use a PE jacket with waterproof paper and are intended for exterior runs. Indoor PVC versions should stay inside conduit or tray.

Compare this item against the rest of the family in the Multi-Pair & CCTV Cables comparison table, or read the knowledge base.

Other items in Multi-Pair & CCTV Cables

Where this is specified

CCTV and video surveillance — coaxial, control and power cable for camera systems
Telecom riser and voice cabling — multi-pair copper for backbone and analogue voice
Industrial control and building automation — shielded control cable for plant rooms and automation

Send your part-number list

We quote from the list you send — no minimum for a first enquiry.

Request a quote Back to Multi-Pair & CCTV Cables

SYV-75-3 CCTV Coaxial Cable, 96-strand braid

Specification

How these cables are built

Where this family is specified

What to confirm before ordering

Questions about this item

Other items in Multi-Pair & CCTV Cables

2-Pair Indoor Twisted Pair Cable

SYV-75-3 CCTV Coaxial Cable, 64-strand braid

SYV-75-5 CCTV Coaxial Cable, 96-strand braid

SYV-75-5 CCTV Coaxial Cable, 128-strand braid

8-Pair Communication Cable

25-Pair Communication Cable

50-Pair Communication Cable

2-Pair Outdoor Twisted Pair Cable

12-Pair Communication Cable

25-Pair Outdoor Communication Cable

RVV 4 x 1.0 CCTV Cable

RVV 2 x 1.0 CCTV Cable

RVVP 3 x 1.0 Shielded Control Cable

RVV 12 x 0.5 Control Cable

More from Multi-Pair & CCTV Cables

Where this is specified

Send your part-number list