Skip to content
Back
HDMI & Display Cables

DisplayPort Cable SP-DP20015

SP-DP20015

Type DisplayPort
Part number SP-DP20015
Family HDMI & Display Cables

HDMI cable for displays, digital signage and AV installations, carrying uncompressed video and audio up to the resolutions listed in the specification. Fibre versions are available for long cable runs.

Request a quote for SP-DP20015 Ask on WhatsApp

Quote goes out against the line that will run it — MOQ, lead time and sample cost follow the construction, not a catalogue minimum. Report comes with the part number.

Choosing a length? Check the bandwidth this resolution needs before you buy.

Made on our line

SP-DP20015 is assembled in-house rather than bought in finished: the components are matched to the length you order, then every piece is checked before packing.

See the six production steps

Specification

PropertyValue
ConstructionDisplayPort
BandwidthUp to 5 Gbps (published figure)
Resolution support1080P, 4K, 8K

One specification covers the HDMI range. HDMI version, AWG, length and plating are set per order, because every run is assembled and tested to the length list you send.

The lining, print and label on the reel are yours: we set the line to your part-number format before the run starts. See how production and testing run. The test report for SP-DP20015 is issued from our in-process and final checks — ask and we send it with the quotation.

How these cables are built

HDMI cable carries four high-speed differential pairs plus control and power conductors, shielded individually and overall. The specification states the bandwidth and the resolutions the range supports; the fibre construction replaces the high-speed pairs with optical fibre for long runs, which removes the copper attenuation problem but requires direction-aware connectors.

Where this family is specified

Displays, digital signage, meeting rooms, classrooms and AV racks. Copper is the normal choice inside a rack or behind a screen; fibre HDMI is used between a source rack and a distant display where a copper run would droop or lose signal.

What to confirm before ordering

Confirm the resolution and refresh rate the display chain needs, the run length, and the connector orientation at each end. HDMI version, conductor gauge and plating are set when the run is assembled, so ask for the datasheet of the exact part number before quoting it — we build each length to the version and plating the design calls for.

Questions about this item

What bandwidth do the HDMI cables support?

The specification states up to 5 Gbps with support for 1080P, 4K and 8K displays, and audio passthrough for 8 channels at 96 kHz or stereo at 192 kHz, without digital-to-analogue conversion in the cable.

When should I use a fibre HDMI cable instead of copper?

Fibre HDMI (part numbers containing FH) is intended for long runs where copper attenuation and cable weight become a problem — typically between a source rack and a distant display. Copper is simpler and cheaper for short runs inside a rack or behind a screen.

Do you also supply DisplayPort cables?

Yes, SP-DP20015 is a DisplayPort cable supplied alongside the HDMI range for monitor and docking-station connections.

How are HDMI version, AWG and plating fixed?

They are set when the run is built: we assemble each length to the HDMI version and plating your design needs, so the three are fixed on the order. Ask for the datasheet of the exact part number and we return it with the quotation.

Compare this item against the rest of the family in the HDMI & Display Cables comparison table, or read the knowledge base.

Other items in HDMI & Display Cables

← Fibre HDMI Cable N-FH20V100 (N-FH20V100)
HDMI Cable H-N20015/N209 (H-N20015/N209) →

More from HDMI & Display Cables

The other part numbers in this family, in part-number order.

All 12 items in HDMI & Display Cables

Send your part-number list

We quote from the list you send — no minimum for a first enquiry.

Request a quote Back to HDMI & Display Cables
WhatsApp Email